Beiter |Sight Tunnel|SIGHT PIN

DESCRIPTIONPopular sight pin from Beiter, Germany.Two sizes available,8×32 for recurve sights10×32 for compound sights.The Beiter Sight Tunnel 8mmThe Beiter Sight Tunnel 8mm was the first Sight Tunnel designed by Werner Beiter. It can be combined with seven interchangeable inserts – all showing different aiming options – available in 4 or 5 different colours.With the aid of the Sight-Pin Tool the inserts can easily be replaced.The Beiter Sight Tunnel 8mm is available in following colours: Black, Clear, Red, and White. You can choose to buy a set including 2 Inserts or – if you prefer – a single Sight Tunnel and combine it with some of the options given by different insert types and colours or Frame Kit Inserts.he Beiter Sight Tunnel 12mm had been developed to allow a larger sight view at full draw.Therefor it is not only interesting for Recurve Archers, but also for some Compound Archers. The Beiter Sight Tunnel 12mmThe Beiter Sight Tunnel 12mm can individually be adapted to the needs of an archer, thanks to inserts in 8 different shapes and 4 or 5 different colours.Any Beiter Sight Tunnel 12mm has an in-built level holder for a dedicated level: it is not legal to use it during a FITA Field tournament, but it may help a lot in your training, learning how to shoot both up and down, and to hold your bow straight!Inserts for Sight Tunnel 8mm Crosshair or Fluorescent Pin, Hole or Dot or even a Square (a straight line allows the eye the best line-up of a ring/circle!).You can choose out of 7 Inserts in different shapes and colours to personalize your field of aiming!Three Frame Kits in different colours are also available. These have been developed by Werner Beiter mainly for Hit-Miss and Field Archery.Inserts for Sight Tunnel 12mmCrosshair or Fluorescent Pin, Hole or Dot or even a Square (a straight line allows the eye the best line-up of a ring/circle!).You can choose out of 7 Inserts in different shapes and colours to personalize your field of aiming!Three Frame Kits in different colours are also available. These have been developed by Werner Beiter mainly for Hit-Miss and Field Archery. Beiter Fluorescent PinsBeiter Fluorescent Pins do collect light over the whole length and convect it on the front side: this makes the pin glowing!Fluor Pins can be used – depending on their diameter – in Inserts #3 and #7 for Sight Tunnel Ø8mm respectively #13, #17, #18, #19 for Sight Tunnel Ø12mm. HINT: Remove the Fluor Pin from the insert, every time you pack away your bow.It is best to remove the Pin every time otherwise it is possible that it could drop from the Sight Tunnel while shooting; the plastic will not be affected.